Skip to main content
Cartegraph Campus

View and Add Cartegraph One Attachments

View

  1. Go to the Detail view of the asset, request, or task record you want to view.
  2. In the section that displays attachments, swipe the attachments left or right to scroll through them.
  3. Tap the attachment to display it full-screen.

The avatar of a record is the primary attachment. 

Link

One way to add an attachment is to link the file. Linked images cannot be primary attachments. Files more than 30 MB must be linked.

  1. Go to the Detail view of the asset, request, or task record you want to add an attachment.
  2. Tap iCG1Link.png.
  3. Enter or paste the file’s link path the file you want to attach to the record.

The link must begin with http://, https://, or ftp:// and cannot be a local or UNC path.

  1. Tap OK.

The linked file displays in the attached files list with an avatar of iCG1Link.png. Tap on the file to view the image.

Add 

The command names and options vary by device and device settings so the steps listed here may not match your device experience.

  1. Go to the record you want to add the attachment.
  2. Tap iCG1Capture.png>Camera.
  3. Take a picture or record a video and confirm you want it added as an attachment.

Tap iCG1PrimaryAttachment.png to make the file the primary attachment, the file that displays as the record's avatar.

If this is the first image file attachment, by default it becomes the primary attachment.

Upload

Upload a file The command names and options vary by device and device settings so the steps listed here may not match your device experience.

Android

  1. Go to the record you want to add the attachment.
  2. Tap iCG1Capture.png>File Chooser.
  3. Tap on the file you want to add.

Hold and press on a file to select more than one file at a time.

Tap iCG1PrimaryAttachment.png to make the file the primary attachment, the file that displays as the record's avatar.

The uploaded file displays in the attachment list and the primary attachment displays as the record’s avatar.

iOS

  1. Go to the record you want to add the attachment.
  2. Tap iCG1Capture.png>File Chooser or Browse.
  3. Tap on the file you want to add.

Hold and press on a file to select more than one file at a time.

Tap iCG1PrimaryAttachment.png to make the file the primary attachment, the file that displays as the record's avatar.

The uploaded file displays in the attachment list and the primary attachment displays as the record’s avatar.